CTX H - Hygienic Series

Built-on Frequency Inverter
This is easiest and most flexible way of changing pump working parameters.

In addition, the pump and motor are protected from overloading and a soft-start function is included.

Hygienic Shroud
The hygienic motor shroud in AISI 304L protects the motor against flooding, deposition of dirt, from spraying water during pump cleaning procedure.

Adjustable Feet
The solution allows easy cleaning of the surface underneath the pump. It can also prove useful when there is a need to move the pump to a different location.

Casing Drainage
The drain connection at the bottom of the pump casing allows to fully drain the pumped liquid from the casing.

MATERIALS, DATA AND LIMITS

Casing
Stainless steel AISI 316L, wetted parts: electropolished Ra<0.8

Impeller
Stainless steel AISI 316L electropolished Ra<0.8
Mechanical seal Single, SiC/carbon (std) or SiC/SiC, FDA approved
Double, SiC/carbon (std) or SiC/SiC, FDA approved

O-rings
EPDM, FKM, NBR (all FDA approved)
Motor IP55; IEC frame B35; PTC thermistor; IE3; 3-phase

Pressure Rating @ 20°C
PN10 – CTX 40-165, CTX 50-145, CTX 50-200,
CTX 65-175
PN16 – CTX 65-230, CTX 65-240, CTX 80-205,
CTX 80-212, CTX 80-260, CTX 100-230

Liquid temp.
-10 °C … +120 °C
(140 °C for short periods during SiP)

Ambient temp.
-20 °C … +40 °C

Viscosity
max ~150 cSt

CONNECTION DIMENSIONS

ModelDIN 11851 thread (std.)DIN 32676 clampSMS3017 clampSMS 1145 threadRJT thread
InletOutletInletOutletInletOutletInletOutletInletOutlet
CTX 40-165DN40DN32DN40DN323833.738321.5”1.25”
CTX 50-145DN50DN40DN50DN40513851382”1.5”
CTX 50-200DN50DN40DN50DN40513851382”1.5”
CTX 65-175DN65DN50DN65DN5063.55163.5512.5”2”
CTX 65-230DN65DN50DN65DN5063.55163.5512.5”2”
CTX 65-240DN65DN40DN65DN4063.53863.5382.5”1.5”
CTX 80-205DN80DN50DN80DN5076.15176513”2”
CTX 80-212DN80DN65DN80DN6576.163.57663.53”2.5”
CTX 80-260DN80DN65DN80DN6576.163.57663.53”2.5”
CTX 100-230DN100DN80DN100DN80101.676.1101.6764”3”