CTX I - Industrial Series





Built-on Frequency Inverter
This is easiest and most flexible way of changing pump working parameters.
In addition, the pump and motor are protected from overloading and a soft-start function is included.
Industrial Flanged Connections
The industrial CTX I pumps are equipped with connections according to EN 1092-1 type11, ANSI 150 or BSPT thread.
Adjustable Feet
The solution allows easy cleaning of the surface undeneath the pump. It can also prove useful when there is a need to move the pump to a different location.
Mounting Brackets
Complete pump unit may be assembled on a baseplate to avoid movement. It can be firmly, permanently fixed to the ground.
MATERIALS, DATA AND LIMITS
Casing
Stainless steel AISI 316L glass blasted Ra<3.2
Impeller
Stainless steel AISI 316L glass blasted Ra<3.2
Mechanical seal
Single, SiC/carbon (std) or SiC/SiC, FDA approved
Double, SiC/carbon (std) or SiC/SiC, FDA approved
O-rings
EPDM, FKM, NBR (all FDA approved)
Motor
IP55; IEC frame B35; PTC thermistor; IE3; 3-phase
Pressure rating @ 20OC
PN10 – CTX 40-165, CTX 50-145, CTX 50-200,
CTX 65-175
PN16 – CTX 65-230, CTX 65-240, CTX 80-205,
CTX 80-212, CTX 80-260, CTX 100-230
Liquid temp.
-10 °C … +120 °C
(140 °C for short periods during SiP)
Ambient temp.
-20 °C … +40 °C
Viscosity
max ~150 cSt
CONNECTION DIMENSIONS
Model | BSPT male thread | EN1092-1 flange (std.) | ANSI 150 flange | |||
Inlet | Outlet | Inlet | Outlet | Inlet | Outlet | |
CTX 40-165 | 1.5” | 1.25” | DN40 | DN32 | 1.5” | 1.25” |
CTX 50-145 | 2” | 1.5” | DN50 | DN40 | 2” | 1.5” |
CTX 50-200 | 2” | 1.5” | DN50 | DN40 | 2” | 1.5” |
CTX 65-175 | 2.5” | 2” | DN65 | DN50 | 2.5” | 2” |
CTX 65-230 | 2.5” | 2” | DN65 | DN50 | 2.5” | 2” |
CTX 65-240 | 2.5” | 1.5” | DN65 | DN40 | 2.5” | 1.5” |
CTX 80-205 | 3” | 2” | DN80 | DN50 | 3” | 2” |
CTX 80-212 | 3” | 2.5” | DN80 | DN65 | 3” | 2.5” |
CTX 80-260 | 3” | 2.5” | DN80 | DN65 | 3” | 2.5” |
CTX 100-230 | 4” | 3” | DN100 | DN80 | 4” | 3” |