Electrically Operated Diaphragm Pumps
| PE & PTFE | Max capacity (l/min) | Connections BSP inv. |
| TE50P | 48 | 1/2″ |
| TE100P | 110 | 1″ |
| TE200P | 220 | 1 1/2″ |
| TE50T | 48 | 1/2″ |
| TE100T | 110 | 1″ |
| TE200T | 220 | 1 1/2″ |
| Metal | Max capacity (l/min) | Connections BSP inv. |
| TE70S | 48 | 3/4″ |
| TE120S | 110 | 1″ |
| TE220S | 220 | 1 1/2″ |
| TE70A/C | 48 | 3/4″ |
| TE120A/C | 110 | 1″ |
| TE220A/C | 220 | 1 1/2″ |
| Sanitary | Max capacity (l/min) | Connections standard |
| TE80 | 48 | DN 25 SMS 3017 tri-clamp |
| TE125 | 110 | DN 38 SMS 3017 tri-clamp |
| TE225 | 220 | DN 51 SMS 3017 tri-clamp |
Materials of wetted parts: Aluminium, PTFE coated aluminium, Stainless steel (industrial and hygienic), Plastic (PE & PTFE)
Diaphragm and ball materials: PTFE, TFM modified PTFE, EPDM, NBR, FKM Up to 220 l/min Up to 4 bar
Options: Pressure switch, Built-on frequency inverter.
FEATURES & BENEFITS
- Low energy cost. Electricity cost < compressed air cost, high efficient (IE3 class) drive
- Long diaphragm lifetime. Pneumatic and mechanical support of the diaphragm
- Run dry without damage. Easy to use, no need of guarding device
- Low spare parts cost. Pump has almost identical design of the wetted side as standard Tapflo air operated diaphragm pump therefore many spare parts are the same
- Self-priming from dry suction pipe. More options of installation
- Clean & easy maintenance. No hydraulic fluid required, no danger of leakage
- Few components & long life design. Low downtime and maintenance cost
TYPICAL APPLICATIONS
- Chemical industry
- Surface conditioning
- Water treatment
- Paint, print industry
- Pulp and paper industry
- Hygienic applications
- Mechanical industry
- Varnish industry
