Skip to content

PE & PTFE pumps

ModelMax capacity
BSP inv.
T5060 1/2″
T200330 1 1/2″

Tapflo pumps made from polyethylene (PE) or virgin PTFE plastics are suitable for handling almost any kind of liquid whether it is viscous, chemically aggressive or with solids.

Few components and a simple but ingenious design is peculiar for all Tapflo pumps. It is a compact pump, easy and quick to maintain, keeping your service costs and process down time to a minimum.

Polyethylene (PE) pumps
Polyethylene (PE HD) has a superior wear resistance which is 6 – 7 times better than for polypropylene (PP). This fact makes the pump suitable for handling abrasive slurries etc. PE is resistant to most kind of aggressive chemicals such as concentrated acids and alkalis. Maximum liquid temperature is 70°C.

PTFE pumps
PTFE (virgin polytetrafluorethylene) is a thermoplastic polymer with superior chemical resistance. The PTFE pump will handle even the most aggressive acids, for instance concentrated nitric acid. Maximum liquid temperature is up to 100°C.


  • Max capacity: 820 l/min
  • Max discharge pressure: 8 bar
  • Material: PE or PTFE
  • ATEX


Chemistry: acids, alkalis, alcohol, solvents, latex, emulsions

Food: CIP fluid, flavouring, pigments

Pulp, Paper: glue, slurries, adhesives, dispersions, resins, sodium silicate, titanium oxide

Surface Conditioning: electroplating baths, various acids, solvents, anodic sludge, varnish, enamels

Water Treatment: sludge handling, filter press applications, neutralization and flocculants

Electronics: carrier fluids, ultra pure liquids, electroplating solutions, mercury, solvents

Print, Paint: glue, additives, varnish, ink, paint, latex, acid, resins, pigment